Nespresso N90 Drawing off espresso, Drawing off hot water,  Cover / Close,  Eject Capsule

 RINSE – PRESS DRAW-OFF KEY

Place a cup under the coffee spout and press one of the draw-off keys (SMALLCUP or LARGECUP).

 RINSING

 READY

8. Drawing off espresso

Use the ON/OFF key to switch on the machine.

 MACHINE HEATING

 RINSE – PRESS DRAW-OFF KEY

Place a cup under the coffee spout and press one of the draw-off keys (SMALLCUP or LARGECUP).

 RINSING

 READY

Open the cover and install a capsule (Fig. 5).

 COVER / CLOSE

Close the cover again.

 READY

Place a cup under the coffee spout and press the required draw- off key (SMALLCUP or LARGECUP).

 SMALLCUP or LARGECUP

Your product is being prepared.

 EJECT CAPSULE

Open the cover. The capsule is ejected.

 COVER / CLOSE

Close the cover again.

 READY

You can stop the draw-off operation at any time by pressing any key.

9. Drawing off hot water

You can adjust the water portion individually (see Chapter 15.4). Install the hot water jet (Fig. 6) to obtain perfect water flow..

During operation, the hot water / steam jet may heat up. However, there is no danger of burns.

At the start of the water draw-off there can be splashing Avoid direct contact with the skin!

Do not replace the replaceable hot water jet directly after drawing off water, because the jet is hot after the draw-off operation.

Use the ON/OFF key to switch on the machine.

 MACHINE HEATING

 RINSE – PRESS DRAW-OFF KEY

Place a cup under the coffee spout and press one of the draw-off keys (SMALLCUP or LARGECUP).

 RINSING

 READY

Place a cup under the hot water jet.

Turn the hot water / steam valve to Hot Water / Steam (Fig. 4).

 WATER / PORTION

The programmed portion is being prepared..

 VALVE /CLOSE

Turn back the hot water / steam valve to Coffee (Fig. 3).

 READY

You can stop the water draw-off operation by turning the hot water / steam valve to Coffee (Fig. 3).

10