RINSING
READY
Remove the cartridge holder from the water tank. Carefully install the filter cartridge and the cartridge holder in the water tank.
Move back the cartridge holder until it engages audibly (Fig. 12).
Fill the water tank with cold, fresh tap water and install it again.
Press the programming key until the machine switches over to programming mode.
FILTER
Press the programming key to activate the programming step.
NO
Press the arrow keys a number of times until the following message appears:
YES
Press programming key to confirm your settings.
VALVE / OPEN
Place a sufficiently large container (approx. 1 litre) under the hot water jet and switch the hot water / steam valve to Hot Water / Steam (Fig. 4).
FILTER / RINSING
The water
VALVE / CLOSE
Turn back the hot water / steam valve to Coffee (Fig. 3).
READY
The water may be slightly coloured (not harmful).
Now you have activated the filter. In Programming Mode the water hardness selection function is no longer displayed.
6.2 Replacing the filter
FILTER / READY |
| ||
Press the programming key until the machine switches over to |
| ||
| programming mode. |
| |
FILTER |
| ||
Press the programming key to activate the programming step. |
| ||
REPLACE |
| ||
Remove the water tank and replace the Claris plus cartridge by a |
| ||
| new one. |
| |
Fill the water tank with cold, fresh tap water and install it again. |
| ||
Press programming key. |
| ||
VALVE / OPEN |
| ||
Place a sufficiently large container (approx. 1 litre) under the hot |
| ||
| water nozzle and switch the hot water / steam valve to Hot |
| |
| Water / Steam (Fig. 4). | E | |
FILTER / RINSING | |||
| |||
The water
VALVE / CLOSE
Turn back the hot water / steam valve to Coffee (Fig. 3).
READY
The water may be slightly coloured (not harmful).
7. Rinsing the coffee machine
When the machine was switched off and has cooled down in the meantime, a rinsing operation is started when the machine is switched on again.
Use the ON/OFF key to switch on the machine.
MACHINE HEATING
9
