4xN 10/100/1000 Span iMatrix Switch

To add an iMatrix Switch to the system:

1.Select the Group to which you want to add an iMatrix Switch by clicking the group bar.

2.Click New Node in the toolbar as shown in Figure 22. The New Node dialog box appears as shown in Figure 23.

Figure 22: Adding a New iMatrix Switch

Figure 23: New iMatrix Switch

2.Enter a name for the iMatrix Switch you are adding in the Node Name text box. Each Node Name in the system must be unique.

3.Enter the IP address of the iMatrix Switch in the IP Address text box. Make sure the IP address is unique on the network.

4.Select your model of the iMatrix Switch from the Product drop-down list.

5.Enter any relevant information about the iMatrix Switch in the Notes text box.

6.Check your settings and click Create. The System Manger now shows the iMatrix Switch in the system similar to Figure 24.

26

Page 30
Image 30
Net Optics ISW-CU3-S4x16 manual To add an iMatrix Switch to the system, Adding a New iMatrix Switch