Net Optics ISW-CU3-S4x16 Viewing iMatrix Switch Information, To view iMatrix Switch information

4xN 10/100/1000 Span iMatrix Switch

2.For the parameter you wish to configure, click on the corresponding value field.

3.Select an option from the drop-down list or enter a new value from your keyboard.

4.The new configuration parameters take effect next time System Manager polls the iMatrix Switch.

The table below describes the configuration options on the Configure Tab.

Host Name	The name of the iMatrix Switch
IP Address	The IP address of the iMatrix Switch.
Netmask	The IP address netmask.
Gateway IP Address	The IP address of the gateway.
System Manager IP	The IP address of the host PC running System Manager
Address	or third-party SNMP management tool.
Monitor Port 1	The speed setting for Monitor Port 1 (GigaBit, 10 Mbps, or
Parameter	100 Mbps).
Monitor Port 2	The speed setting for Monitor Port 2 (GigaBit, 10 Mbps, or
Parameter	100 Mbps).
Monitor Port 3	The speed setting for Monitor Port 3 (GigaBit, 10 Mbps, or
Parameter	100 Mbps).
Monitor Port 4	The speed setting for Monitor Port 4 (GigaBit, 10 Mbps, or
Parameter	100 Mbps).

Viewing iMatrix Switch Information

System Manager allows you to view the current iMatrix Switch configuration information, including the Monitor Port connections.

To view iMatrix Switch information:

1.Click the image of the iMatrix Switch you want to view in the System Frame. A window similar to Figure 27 appears.

29