Net Optics Link Aggregator Tap 10/100 In-Line to GigaBit with SFP Monitor Ports manual

10/100 In-Line Link Aggregator Tap

NOTE:_____________________________________________________________

At 10Mbps, if any of the network links are unplugged during operation, it will be necessary to restart traffic from the connected network devices upon re-connecting to the Link Aggregator. This is to ensure that traffic is properly copied to the monitor ports and only applies to networks running at 10Mbps.

____________________________________________________________________

Connecting Monitoring Devices

1..Supply power to the Tap using the power supply adapter included with the unit.. Verify that the power LED illuminates..

2..Remove the SFP from its protective packaging..

3. Remove the temporary plug from Monitor Port 1..

®
		Monitor
1	2	3	4
LINK	LINK	LINK	LINK
ACT	ACT	ACT	ACT

www.netoptics.com

2

1

In-Line Link Aggregator

1

2

Network

3

4

A

B

A

B

A

B

A

B

LINK

ACT

To Monitor Device

Figure 5: Connecting to Monitoring Devices using SFP modular connectors

4.. Insert the SFP in the Monitor 1 Port until you hear it click into place..

5.Connect Monitoring Port 1 to the appropriate port on the monitoring device.. This will monitor all aggregated links connected to the network ports..

6.If you are installing multiple SFPs, repeat Steps 1 through 4 for Monitor Port 2..

6