Net Optics Link Aggregator Tap 10/100 In-Line to GigaBit with SFP Monitor Ports Key Features

10/100 In-Line Link Aggregator Tap

Key Features

Passive, Secure Technology

•Supports full-duplex monitoring of four links with a single NIC, increasing monitoring efficiency

•Optional Regeneration Tap technology enables up to four devices to simul- taneously monitor all aggregated traffic

•Unique Zero Delay™ technology ensures no packet delay or loss if power is lost to the Tap

•Provides complete full-duplex visibility at 10 or 100 Mbps without data stream interference or introducing a point of failure

•Passes all traffic (including errors) from all layers for comprehensive troubleshooting

•No IP address is needed for the Tap or monitoring device, enhancing monitoring security

•Redundant power ensures monitoring uptime

•Fully RoHS compliant

•Fully IEEE 802..3 compliant

Ease of Use

•LED indicators show redundant power, speed, link, and activity status

•Front-mounted connectors support easy installation and operation

•Monitoring and network cables included for plug-and-play deployment

•Silk-screened application diagram illustrates all connections for easy deployment

•Small form-factor pluggable (SFP) monitor port connectors increase monitoring options

•Compatible with all major manufacturers’ monitoring devices, including protocol analyzers, probes, and intrusion detection/prevention systems

Support

•Net Optics offers free technical support throughout the lifetime of your purchase.. Our technical support team is available from 8 am to 5 pm

Pacific Time, Monday through Friday at +1 (408) 737-7777 and via email at ts-support@netoptics..com.. FAQs are also available on Net Optics website at www..netoptics..com..

2