NetComm 85Mbps manual Technical Data, Standards

NetComm PowerlineTM Series - Powerline Adapters 85Mbps Twin Pack

Technical Data

The table below shows the Technical Specifications of the NP285 Powerline Adapter.

Standards	IEEE 802.3 10/100 Ethernet & 802.3u Fast Ethernet
	10/100 Mbps Auto MDI/MDIx Support
	14/85 Mbps HomePlug 1.0 compatible
Protocols	CSMA/CA MAC control
Carrier rate	14/85 Mbps
Modulation	OFDM, DQPSK, DBPSK, ROBO Carrier Modulation Support
Frequency Band	4.3 Mhz to 20.9 Mhz band
Range	Up to 5000 square feet
Security	56 bit DES
Platform Support	OS Independent with TCP/IP protocol installed and with Ethernet port
LED Indicators	1x Power LED
	1x Powerline Link Status LED
	1x Ethernet Link/Activity Status LED
HomePlug connection	Standard Australian power plug
Computer interface	RJ45
Power supply	Switch mode 90V - 264V supply
Temperature Storage:	-25°C -70°C
Operation	suitable for room temperature, 27°C
Environment	Suitable for room temperature, 27°C, 10-90% humidity (non-condensing)

System requirements

for Configuration Utility Ethernet interface

	Windows 98SE, Windows Me, Windows 2000, Windows XP
External Connectors	1 x Electrical Power Socket
	1 x RJ45 for 10/100 Base-T Ethernet (AutoMDI/MDI-X)
Dimension	Plastic housing
	92mm x 66mm x 45mm(height x width x depth)
Weight	Approx 180g
Approvals	C-Tick
QoS	Forward Error Correction (FEC) CSMA/CA with prioritization & ARQ

YML���	Powerline Adapters User Guide
www.netcomm.com.au	�3