Field | Setting Details |
Service name: | Any name to describe your ISP |
User Name: | Your ISP will provide a case sensitive User Name in a |
| format similar to your email address. Contact your ISP |
| for details |
Password: | Enter your Password as supplied by your Service |
| Provider (characters are usually all lower case) |
Disconnect timeout: | 0 ❖ |
Mode/Wan Connection Type: | PPPoE LLC or PPPoA |
VPI: | 8 ❖ |
|
|
VCI: | 35 ❖ |
|
|
Static IP Address: | 192.168.241.101 ❖ |
|
|
Subnet Mask: | 255.255.255.0 ❖ |
|
|
Default Gateway: | 0.0.0.0 ❖ |
|
|
Bridge mode: | Disabled ❖ |
|
|
❖Default Setting. Although in most cases you will not be required to alter these default settings for your NB1300, your ISP may identify specific settings to enable connection to their service. Please refer to your ISP or Network Administrator for further information.
4.Click Submit and then click the Save Setting and Reboot button from the bottom of the menu. Wait for the configuration to complete.
Standard configuration of your NetComm NB1300 ADSL Modem is now complete. You should be able to access the Internet through the unit, when it is set to be your gateway on your computer/s. Refer to Step 3 for more information.
www.netcomm.com.au | Rev. 2 - YML643 |
Page 8 | NB1300 ADSL Modem |
