Internet – ADSL
Enable ADSL Port:
Check this box to enable this function. It simply invokes the line mode that you choose here for the router.
Select the support of line modes:
There are several selections, and you may select them according to the line modes supported by your ISP and your needs.
Capability Enabled:
Two items are provided here for you to choose.
Bitswap:
It is a mandatory receiver initiated feature to maintain the operating conditions of the router during changing environment conditions. It reallocates the data bits and power among the allowed carriers without modification of the higher layer control parameters in the ATU. After a bit swapping reconfiguration, the total data rate and the data rate on each latency path is unchanged. Check this box to enable the function. If not, uncheck this box to close the function.
Seamless Rate Adaptation:
It enables the ADSL2/ ADSL2+ Router to change the data rate of the connection while in operation without any service interruption or bit errors. Check this box to enable the function. If not, uncheck this box to close the function.
NB6, NB6W, NB6Plus4, NB6Plus4W, NB6Plus4Wn User Guide | YML854Rev1 |
78 | www.netcomm.com.au |
