NETGEAR FS526Tv2 manual Install the Switch in a Rack,  To install the switch in a rack

ProSAFE 26-Port Fast Ethernet Smart Switch FS526Tv2

Install the Switch in a Rack

To install the switch in a rack, you need the 19-inch rack-mount kit that is supplied with switch.

Note: To prevent the rack from overbalancing and toppling over, install devices from the bottom of the rack to the top.

To install the switch in a rack:

1.Attach the supplied mounting brackets to the side of the switch.

2.Insert the screws provided in the rack-mount kit through each bracket and into the bracket mounting holes in the switch.

3.Tighten the screws with a No. 1 Phillips screwdriver to secure each bracket.

4.Align the mounting holes in the brackets with the holes in the rack, and insert two pan-head screws with nylon washers through each bracket and into the rack.

5.Tighten the screws with a No. 2 Phillips screwdriver to secure the switch in the rack.

Installation

13