NETGEAR FS526Tv2 A

19

A

A. Physical and Technical Specifications

This appendix provides the physical and technical specifications for the switch.

Table 4. Physical and technical specifications

Feature Description

Network protocols and

supported standards • IEEE 802.3i 10BASE-T

• IEEE 802.3u 100BASE-TX

•IEEE 802.3ab 1000BASE-T

• IEEE 802.3x flow control

• IEEE 802.1x

• IEEE 802.1D

• IEEE 802.3az (EEE)

Management • IEEE 802.1Q static VLAN (up to 128, ranging from 2 to 4 K)

•IEEE 802.1p Class of Service (CoS)

•Port trunking with support for LACP

Interfaces • Twenty-four RJ-45 connectors for 10BASE-T and 100BASE-TX (Auto

MDI/MIDX on all ports)

•Two RJ-45 connectors for 10BASE-T, 100BASE-TX, and 1000BASE-T (Auto

MDI/MIDX on both ports)

LEDs • Power LED for the switch

• Link/ACT (activity) LED for each port

Performance •Forwarding mode. Store-and-forward

•Bandwidth. 8.8 Gbps

•Address database size. 8 k Media Access Control (MAC) addresses

Power supply • Power consumption. 12W maximum

•Universal power input. 100–240 VAC/50–60 Hz

Dimensions (H x W x D) • 1.7 x 12.83 x 6.6 in.

•43 x 326 x 168 mm

Weight • 2.98 lb

•1.35 kg

Contents

Main ProSAFE 26-Port Fast Ethernet Smart Switch FS526Tv2 Support Trademarks Revision History Contents Chapter 1 Introduction and Hardware Description Appendix A Physical and Technical Specifications Chapter 2 Installation Chapter 3 Troubleshooting Description Overview Switch Features Package Contents Front Panel Back Panel Introduction and Hardware Description ProSAFE 26-Port Fast Ethernet Smart Switch FS526Tv2 LEDs The following table describes the LEDs. Figure 5. Generic product label Product Label Table 1. LED descriptions RJ-45 Ports Factory Defaults Button and Reset Button Page Installation ProSAFE 26-Port Fast Ethernet Smart Switch FS526Tv2 Step 1: Prepare the Site Table 2. Site requirements Step 2: Install the Switch You can install the switch on a flat surface or in a standard 19-inch rack. Install the Switch on a Flat Surface Install the Switch in a Rack Step 3: Check the Installation Step 4: Connect Devices to the Switch Step 5: Apply AC Power Step 6: Manage the Switch through a Web Browser or through the Smart Control Center Page Troubleshooting Troubleshooting Chart The following table lists symptoms, causes, and solutions of possible problems. Table 3. Troubleshooting chart Troubleshooting Suggestions Network Adapter Cards Page A Table 4. Physical and technical specifications Physical and Technical Specifications Table 4. Physical and technical specifications (continued)