ProSAFE 26-Port Fast Ethernet Smart Switch FS526Tv2

Troubleshooting Chart

The following table lists symptoms, causes, and solutions of possible problems.

Table 3. Troubleshooting chart

Symptom

Cause

Solution

 

 

 

Power LED is off.

No power is received.

• Check the power cord connections for the

 

 

switch at the switch and the connected

 

 

device.

 

 

• Ensure that all cables are used correctly and

 

 

comply with the Ethernet specifications.

 

 

 

Link/ACT LED is off or

Port connection is not working.

• Check the crimp on the connectors and make

intermittent.

 

sure that the plug is properly inserted and

 

 

locked into the port at both the switch and the

 

 

connecting device.

 

 

• Ensure that all cables are used correctly and

 

 

comply with the Ethernet specifications.

 

 

• Check for a defective adapter card, cable, or

 

 

port by testing them in an alternate

 

 

environment where all products are

 

 

functioning.

 

 

 

File transfer is slow or

Half- or full-duplex setting on the

Make sure that the attached device is configured

performance is degraded.

switch and the connected device

to autonegotiate.

 

are not the same.

 

 

 

 

A segment or device is

One or more devices are not

• Verify that the cabling is correct.

not recognized as part of

properly connected, or cabling

• Ensure that all connectors are securely

the network.

does not meet Ethernet

positioned in the required ports. Equipment

 

guidelines.

might have been accidentally disconnected.

 

 

 

Link/ACT LED is blinking

A network loop (redundant path)

Break the loop by ensuring that there is only one

continuously on all

has been created.

path from any networked device to any other

connected ports and the

 

networked device.

network is disabled.

 

 

 

 

 

Troubleshooting Suggestions

If the suggestions in the previous table do not resolve the problem, see the troubleshooting suggestions in this section.

Network Adapter Cards

Ensure that the network adapter cards that are installed in the computers are functioning correctly and that the latest software driver has been installed.

Troubleshooting

17

Page 17
Image 17
NETGEAR FS526Tv2 manual Troubleshooting Chart, Troubleshooting Suggestions, Network Adapter Cards, Troubleshooting chart

FS526Tv2 specifications

The NETGEAR FS526Tv2 is a high-performance Layer 2 managed switch designed to meet the growing networking needs of small to medium-sized businesses. This switch is part of NETGEAR's ProSAFE line, recognized for its reliability and scalability. The FS526Tv2 is equipped with 24 Gigabit Ethernet ports and 2 SFP (small form-factor pluggable) ports, facilitating both copper and fiber connectivity, which means businesses can expand their network infrastructure while maintaining optimal performance.

One of its standout features is the extensive management capabilities, including VLAN support, link aggregation, and network monitoring. The VLAN feature allows users to segment network traffic efficiently, enhancing security and performance by isolating different types of data. With link aggregation, the switch can combine multiple physical connections for improved bandwidth and redundancy, ensuring a resilient network setup.

The FS526Tv2 utilizes advanced Quality of Service (QoS) functionality, which enables prioritization of critical network traffic such as voice over IP (VoIP) or video conferencing. This is particularly vital for businesses relying on real-time applications, ensuring a consistent level of service for all users.

Power over Ethernet (PoE) is another essential characteristic of the FS526Tv2, providing the capability to deliver power and data over the same Ethernet cable. This simplifies the installation of devices like IP cameras and access points, reducing the need for additional power sources and enhancing flexibility in network design.

The switch is designed for energy efficiency, conforming to the IEEE 802.3az standard, which allows for reduced power consumption during low traffic periods. This feature not only lowers operational costs but also contributes to environmental sustainability.

Additional benefits include a user-friendly web-based interface for simplified management, as well as SNMP support for easier integration into larger network management systems. The FS526Tv2's robust hardware and fan-less design ensure quiet operation, making it suitable for office environments.

In conclusion, the NETGEAR FS526Tv2 is a versatile, efficient, and feature-rich managed switch that provides businesses with the tools necessary for building reliable and scalable networks. Its combination of performance, management capabilities, and energy efficiency makes it a smart investment for any organization looking to enhance its networking infrastructure.