NETGEAR GS700TR manual Package Contents

GS700TR Series Hardware Installation Guide

•Auto Uplink™ on all ports to make the right connection.

•Automatic address learning function to build the packet-forwarding information table. The table contains up to 4K Media Access Control (MAC) addresses.

•Full- and Half-duplex functions for all 10/100/1000 Mbps ports.

•Store-and-Forward transmission to remove bad packets from the network.

•Full-duplex IEEE 802.3x pause frame flow control.

•Active flow control to minimize packet loss/frame drops.

•Half-duplex back-pressure control.

•Per port LEDs, System LEDs.

•Standard 1U high, rack mountable 17” chassis.

•Fan speed control supported.

Package Contents

Figure 1-1shows the package contents of the NETGEAR GS700TR Series Smart Switch.

Figure 1-1

Verify that the package contains the following:

•NETGEAR Smart Switch

Introduction 1-3

v1.0, December 2007