NETGEAR GS700TR manual LED Designations, Port LEDs

GS700TR Series Hardware Installation Guide

•System LEDs

Figure 2-4illustrates the NETGEAR GS748TR Smart Switch back panel:

RS-232 Power Connector

Figure 2-4

The back panel contains the following:

•A 100-240VAC/50-60 Hz universal input, which is a standard AC power receptacle for accommodating the supplied power cord.

LED Designations

Port LEDs

The following table describes the port LED designations.

Table 2-1. Port LEDs

Port	LED	Designation
24/48-10/100/1000 Ports -	SPD/Link/ACT LED	• Solid Green - A valid 1000Mbps link is
One LED/Port		established on the port.
		• Flashing Green - Packet transmission or
		reception is occurring on the port at
		1000Mbps.
		• Solid Yellow - A valid 10/100Mbps link is
		established on the port.
		• Flashing Yellow - Packet transmission or
		reception is occurring on the port at 10/
		100Mbps.
		• Off - No 10/100Mbps link is established on
		the port.

Physical Description 2-7

v1.0, December 2007