Managed Layer 2 Switches GSM7224 and GSM7248 Hardware Installation Guide
1-2 Introduction
v1.0, July 2009
GSM7224 Rear Panel
The rear panel has a console port, a redundant power supply connector, and a standard AC power
receptacle for the supplied power cord.
GSM7248 Front Panel and LEDs
The following figure shows the front panel of the GSM7248. The front panel contains LEDs, a
USB port, a RST (reset) button, RJ-45 jacks, and copper/fiber combo ports.
For information about the LEDs on the front panel of the switch, see “Interpreting the LEDs” on
page 1-3.
Figure 1-2
Figure 1-3
Power receptacle
Console Redundant
power supply
connector
Reset
LEDs USB port
RJ-45 jacks Copper/fiber
combo ports
button