NETGEAR GSM7248, GSM7224 manual SFP Modules, Connecting a Redundant Power Supply RPS

Managed Layer 2 Switches GSM7224 and GSM7248 Hardware Installation Guide

SFP Modules

The module bay accommodates a standard SFP module with an LC connector that is compatible with the IEEE 802.3z 1000BASE-X standard. SFP modules are sold separately.

To install an SFP module insert the SFP module into the module bay. Press firmly to ensure that the module seats into the connector.

Figure 2-2

Connecting a Redundant Power Supply (RPS)

Each switch has a redundant power supply (RPS) connector and a power receptacle on the rear.

Power receptacle

Redundant power supply connector

Figure 2-3

2-6 Hardware Installation

v1.0, July 2009