NETGEAR READYNAS 102, READYNAS 716X, READYNAS 516, READYNAS 316, READYNAS 312, READYNAS 314 109

ReadyNAS OS 6.1

A pop-up screen displays.

3.Configure the settings as explained in the following table:

Item	Description
Name	The name is provided for information only and cannot be changed.
Target	The target is the address that an iSCSI client (that is, an initiator) needs to access the
	LUN group. The Target field is automatically populated, but you can delete the content
	and then replace the content with a custom target address.
Require initiators	Select this check box to enable CHAP authentication and to allow only authenticated
to identify	initiators access to the LUN group. By default, access to the LUN group is open to the
themselves using	initiators that you add to list of initiators (see Add an iSCSI Initiator on page 110).
CHAP
Allowed Initiators	Select one of the following radio buttons:
	• Any. Access to the LUN group is granted to all initiators that have information
		about the target address. (If CHAP authentication is enabled, access is dependent
		on CHAP authentication.)
	• Selected. Access to the LUN group is granted to iSCSI qualified names (IQNs)
		only. (If CHAP authentication is enabled, access is dependent on CHAP
		authentication.)
	For more information about configuring iSCSI initiators, see the following sections:
	•	Add an iSCSI Initiator on page 110
	•	Remove an iSCSI Initiator on page 112
	•	Edit the CHAP Password on page 113

LUNs

109