NETGEAR VPN Firewall 200 FVX538 manual Inbound Rules

	ProSafe VPN Firewall 200 FVX538 Reference Manual
Table 4-2. Inbound Rules
Item	Description
Services	Select the desired Service or application to be covered by this rule. If the desired
	service or application does not appear in the list, you must define it using the
	Services menu (see “Adding Customized Services” on page 4-21).
Action (Filter)	Select the desired action for packets covered by this rule:
	• BLOCK always
	• BLOCK by schedule, otherwise Allow
	• ALLOW always
	• ALLOW by schedule, otherwise Block
	Note: Any inbound traffic which is not allowed by rules you create will be blocked by
	the Default rule.
Action (Select	Select the desired time schedule (i.e., Schedule1, Schedule2, or Schedule3) that will
Schedule)	be used by this rule (see “Setting a Schedule to Block or Allow Specific Traffic” on
	page 4-24).
	• This drop down menu gets activated only when “BLOCK by schedule, otherwise
	Allow” or “ALLOW by schedule, otherwise Block” is selected as Action.
	• Use schedule page to configure the time schedules.
LAN Server or DMZ	This LAN address or DMZ Server address determines which computer on your
Server	network is hosting this service rule. (You can also translate this address to a port
	number.)
Translate to Port	Check the “Translate to Port Number” and enter a port number if you want to assign
Number	the LAN Server to a specific port.
WAN Users	These settings determine which Internet locations are covered by the rule, based on
	their IP addresses. Select the desired option:
	• Any – All Internet IP address are covered by this rule.
	• Single address – Enter the required address in the start field.
	• Address range – If this option is selected, you must enter the start and end fields.
WAN Destination IP	This setting determines the destination IP address applicable to incoming traffic.
Address	This is the public IP address that will map to the internal LAN server; it can either be
	the address of the WAN1 or WAN2 ports or another public IP address.

Firewall Protection and Content Filtering 4-5

v1.0, August 2006