User Manual for the NETGEAR 54 Mbps Wireless USB 2.0 Adapter WG111
Configure your WG111.
a.Click the 
icon on the Windows desktop or in the system tray to open the WG111 Smart Wizard Wireless Settings Utility.
The utility opens to the Settings tab page.
Click Help for instructions on using the Smart Wizard Wireless Utility.
b.Change the Network Name SSID to match your network.
Tip: As an alternative to typing in the SSID, you can use the
c.Click Apply to activate the connection.
You can also enter a profile name and click Save Profile to store the current settings.
Tip: Create profiles called work and home. Then, activate whichever one you need for your current location.
Click here to open the configuration utility.
WG111 system tray icon
Smart Wizard Wireless Utility Settings page
Tip: Click Help to view the
Note: The NETGEAR default settings are Infrastructure mode, with Any (first available network that replies) for the wireless network name SSID, and WEP disabled. If your WLAN settings are different from the NETGEAR default settings, you will not connect. Set up your WG111 accordingly.
Note: This procedure assumes you are connecting to a wireless network which is not using WEP security. If your network includes WEP settings, click the Settings tab page and configure the WG111 accordingly. For help with these steps, click the Help button in the WG111 Configuration Utility to view context- sensitive help information,
or see “Enabling Wireless Security Features” on page
Basic Setup |
