Problem

 

Cause

 

Solution

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

The Ethernet light

 

The power light is

 

• The other side of the Ethernet cable is not

 

doesn’t light up.

 

 

lit, the Ethernet

 

 

connected to a hub or switch, or the hub or

 

 

 

 

 

 

network cable is

 

 

switch is not powered on. Make sure the cables

 

 

 

 

 

 

attached to the

 

 

are inserted all the way – you should hear a click.

 

 

 

 

 

 

Ethernet port, but

 

 

• The Ethernet cable is bad. Replace it with the one

 

 

 

 

 

 

the Ethernet light

 

 

that came with the access point.

 

 

 

 

 

 

 

isn’t lit. There is a

 

 

 

 

 

 

 

 

 

 

• You have the wrong cable between the router and

 

 

 

 

 

 

 

possible hardware

 

 

 

 

 

 

 

 

 

 

the modem. Use the standard straight through or

 

 

 

 

 

 

 

connection

 

 

 

 

 

 

 

 

 

 

the cable that came with the access point.

 

 

 

 

 

 

 

problem.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

I cannot get onto

 

You may not have

 

• Check the wireless configuration of the wireless

 

the Ethernet

 

 

configured the

 

 

adapters and access point through its Web-based

 

 

network from the

 

 

wireless

 

 

interface from a computer connected to the

 

 

wireless network.

 

 

parameters of the

 

 

Ethernet network. The Wireless Network Name

 

 

 

 

 

 

computers with

 

 

(SSID), WEP and other settings need to be

 

 

 

 

 

 

wireless adapters

 

 

exactly the same for all computers and devices on

 

 

 

 

 

 

to be the same as

 

 

the wireless network.

 

 

 

 

 

 

the access point.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

CE Declaration of Conformity

For the following equipment:

 

 

 

 

 

54 Mbps Wireless Access Point

 

 

 

 

0768 !

 

 

 

 

 

 

(Product Name)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

WG602

(Model Designation)

is herewith confirmed to comply with the requirements set out in the Council Directive on the Approximation of the Laws of the Member States related to Electromagnetic Compatibility (89/336/EEC), Low-voltage Directive (73/23/EEC) and the Amendment Directive (93/68/EEC). For the evaluation regarding the Directives, the following standards were applied:

ETS 300 328:1996-11+A1:1997-07

ETX 300 826: 1997-11

EN60950:1992+A1:1993+A3:1995+A4:1996+A11:1997

Déclaration de conformité CE

Il est certifié que l’équipement suivant :

54 Mbps Wireless Access Point

 

 

 

 

 

 

 

 

 

0768 !

(nom du produit)

 

 

 

 

WG602

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

(deésignation du modele)

 

 

 

 

 

est conforme aux exigences définies par la Directive du Approximation of the Laws of the Member States related to Electromagnetic Compatibility (89/336/EEC), Low-voltage Directive (73/23/EEC) and the Amendment Directive (93/68/EEC). For the evaluation regarding the Directives, the following standards were applied:

ETS 300 328:1996-11+A1:1997-07

ETX 300 826: 1997-11

EN60950:1992+A1:1993+A3:1995+A4:1996+A11:1997

23

24

Page 13
Image 13
NETGEAR WG602 manual CE Declaration of Conformity, Déclaration de conformité CE, Mbps Wireless Access Point