Note: After you’ve changed the settings on the bridge, you’ll have to reset the TCP/IP dialog box back to its original state.
Mac OS X
1.Choose System Preferences from the Apple () menu.
2.Double-click Network.
3.If not already selected, select
4.If Manually isn’t selected in the Configure list, note the current selection and select Manually.
OR
If Manually is selected, note the current IP address.
5.Change the IP address to 192.168.0.230 and click Apply Now.
Note: After you’ve changed the settings on the bridge, you’ll have to reset the Network: TCP/IP dialog box back to its original state.
Linux® and UNIX®
If you’re configuring the bridge with a
Changing the Bridge’s IP Address
1.Start your browser software.
2.Type http://192.168.0.201 as the web address and press Enter (or Return).
3.Type admin as the User ID and type password as the Password.
4.Click OK.
You’ll see the Status page.
5.To change the IP address for the bridge to match your wireless network, click IP Settings.
6.Select Use this IP address and type a unique IP address for the bridge. The first three sets of numbers (xxx.xxx.xxx.yyy) should be the same as your access point or router. The last set of numbers (.yyy) should be a set of unique numbers on your network.
OR
If your network has a router with a router table, change the Protocol to DHCP.
(By doing this, the bridge’s IP address is assigned dynamically by the router and you’ll use
the router table to find out what the bridge’s current IP address is.) | 10 |
