8. Click Apply.
9. Click Logout.
10. Restore the computer to its previous
network settings. See Checking and
Changing the Computer’s IP Address
on page 8 for details.
11. Make any other configuration
changes.
12. If you want this bridge used
elsewhere on your network, install
it now.
Note: If you have multiple WGE101 bridges in your network and want to use the default IP
address of 192.168.0.201, only one bridge can use this default IP address. Youll have to create
IP addresses for each bridge using 192.168.0.yyy, where yyy is a unique number for each
device.
Using the NetBIOS Name
If youre familiar with using a devices NetBIOS name, you may use it in the Internet browser
instead of the IP address to access the configuration software. The WGE101 NetBIOS name is
netgearxxxx, where xxxx stands for the last four digits of the WGE101 MAC address, which is
found on the bridges label.
11