NETGEAR NTGWGR614 manual Connect to the Internet, Login window

Reference Manual for Cable/DSL Wireless Router WGR614

A login window like the one shown below opens:

Figure 2-5: Login window

3. Connect to the Internet

Figure 2-6: Setup Smart Wizard

a.You are now connected to the router. If you do not see the menu above, click the Setup Smart Wizard link on the upper left of the main menu.

b.Click Next and follow the steps in the Setup Smart Wizard for inputting the configuration parameters from your ISP to connect to the Internet.

Note: If you choose not to use the Setup Smart Wizard, you can manually configure your Internet connection settings by following the procedure “How to Manually Configure Your Internet Connection” on page 2-12.

Unless your ISP automatically assigns your configuration automatically via DHCP, you will need the configuration parameters from your ISP that you recorded in the form, “Record Your Internet Connection Information” on page 2-3.

Connecting the Router to the Internet 2-7