Reference Manual for the 54 Mbps Wireless Router WGR614 v5

2-6 Introduction

June 2004 202-10036-01

The Router’s Front Panel

The front panel of the WGR614 v5 router contains the status lights described below.

Figure 2-1: WGR614 v5 Front Panel

You can use the status lights to verify connections. Viewed from left to right, the table below

describes the lights on the front panel of the router.

Table 2-1. Status Light Descriptions

Label Activity Description
Power On Amber Blinking
On Green Solid
Off
Solid Amber
Power is supplied to the router and it is performing its diagnostic test.
Power is supplied and the router it has passed its diagnostic test.
Power is not supplied to the router.
The router has failed its diagnostic test.
Test On
Off The unit is performing the power on self test diagnostic.
The unit successfully completed the power on self test diagnostic.
Wireless On
Off The Wireless port is initialized and the wireless feature is enabled.
The wireless feature is turned off or there is a problem.
Internet On
Blink The Internet port has detected a link with an attached device.
Data is being transmitted or received by the Internet port.
LAN On (Green)
Blink (Green)
On (Amber)
Blink (Amber)
Off
The LAN (local area network) port has detected link with a 100 Mbps
device.
Data is being transmitted or received at 100 Mbps.
The Local port has detected link with a 10 Mbps device.
Data is being transmitted or received at 10 Mbps.
No link is detected on this port.
0OWER )NTERNET0ORT
7IRELESS ,!.0ORT
4EST