NETGEAR WGR614 v5 manual Wireless Card Access List Setup

Reference Manual for the 54 Mbps Wireless Router WGR614 v5

1.Log in to the WGR614 v5 firewall at its default LAN address of http://www.routerlogin.net with its default user name of admin and default password of password, or using whatever LAN address and password you have set up.

Note: When configuring the firewall from a wireless computer whose MAC address is not in the Trusted PC list, if you select Turn Access Control On, you will lose your wireless connection when you click on Apply. You must then access the wireless router from a wired computer or from a wireless computer which is on the access control list to make any further changes.

2.Click Advanced Wireless Setup in the main menu of the WGR614 v5 firewall.

3.From the Wireless Settings menu, click Setup Access List to display the Wireless Access menu shown below.

Figure 4-7: Wireless Card Access List Setup

4.Click Add to add a wireless device to the wireless access control list. The Available Wireless Cards list displays.

4-12 Wireless Configuration

June 2004 202-10036-01