NETGEAR WGR614 v5 manual Restart Your Network in the Correct Sequence

Reference Manual for the 54 Mbps Wireless Router WGR614 v5

Note: Place the WGR614 v5 router in a location which conforms to the “Observe Performance, Placement, and Range Guidelines” on page 4-1. The stand provided with the wireless router provides a convenient, space-saving way of installing the wireless router. Avoid stacking it on other electronic equipment.

f.Securely insert the blue cable that came with your wireless router (the blue NETGEAR cable in the diagram below) into a LAN port on the router such as LAN port 4 (point C in the diagram), and the other end into the Ethernet port of your computer (point D in the diagram).

D

FRPSXWHU

%OXH1(7*($5

&DEOH

,QWHUQHW

C URXWHU

/$13RUWV PRGHP



Figure 3-3: Connect the computer to the wireless router

Your network cables are connected and you are ready to restart your network.

2.RESTART YOUR NETWORK IN THE CORRECT SEQUENCE

Warning: Failure to restart your network in the correct sequence could prevent you from connecting to the Internet.

a.First, turn on the broadband modem and wait 2 minutes.

b.Now, plug in the power cord to your wireless router and wait 1 minute.

c.Last, turn on your computer.

Note: For DSL customers, if software logs you in to the Internet, do not run that software. You may need to go to the Internet Explorer Tools menu, Internet Options, Connections tab page where you can select “Never dial a connection.”

Connecting the Router to the Internet 3-3

July 2004 202-10036-01