NETGEAR WN802T Setting LAN IP Options

RangeMax NEXT Wireless Access Point WN802T Reference Manual
Installation and Configuration 2-9
v1.0, June 2006
Your Web browser should automatically find the RangeMax NEXT and display the home
screen, as shown in Figure 2-6 above.
Setting LAN IP Options
The basic settings for your wireless access point are entered on this screen. With the exception of
selecting the correct Country/Region, most of the other default settings will work in most cases.
However, if your wireless access point is part of a more complex LAN network, then modify the
settings to meet the requirements of your network based on the explanation of the various fields.
To configure the basic settings of your wireless access point:
1. Under Setup on the main menu, select Basic Settings. The Basic Settings screen will display as
shown in Figure 2-7 below.
2. Enter the Access Point Name of the WN802T.
This unique name is the access point NetBIOS name. The default Access Point Name is
located on the bottom label of WN802T. The default is netgearxxxxxx, where xxxxxxx
represents the last 6 digits of the WN802T MAC address. You may modify the default name
with a unique name up to 15 characters long.
3. Enter the IP Address fields of the WN802T.
Figure 2-7