Media Settings
Increasing the ladder bar code’s narrow width feature size will reduce the heating modulation’s geometric impact. The 4500 Series printers will generate ANSI Grade ‘A’ and ‘B’ ladder bar codes when using a narrow feature size of 3 dots (3/300 inches, 0.0099 inches)3. The bar codes shown in Figure 13 were printed with the
Bar Code Print Settings
Print settings for labels containing bar codes will not differ from the optimal settings for other label types. Bar code labels receiving high ANSI grades (‘A’ and ‘B’) will contain very legible text and graphics.
Printing with factory approved media and print settings will produce labels with the highest quality bar codes. The sample labels shown in Figure 14 demonstrate labels printed with poor quality for bar codes. For comparison the same bar codes were printed in Figure 13 with favorable settings.
Figure 14-A shows a ladder bar code with bars wider than optimal and very narrow spaces. Fixing this problem will require either 1) reducing the Print Darkness Setting, 2) reducing the Print Speed Setting, or 3) a combination of reducing Print Darkness and Print Speed. Notice also that the same picket fence bar code in Figure 14-A does not suffer as much from the poor settings.
Figure 14-B shows bar codes with drop-outs and light print in the bars. Fixing this problem will require either 1) raising the Print Darkness Setting, 2) reducing the Print Speed Setting, or 3) a combination of raising Print Darkness and reducing Print Speed.
(A) |
| (B) |
|
|
|
Figure 14 – Poor Quality Bar Code Samples
3These results obtained using Datasouth Media and Datasouth recommended print settings.
37
