Data Communications
Setting the DTR Polarity
ITEM
10. Press the FEED key. DTR Polarity is displayed.
11.Use the 
or CANCEL keys to set the DTR Polarity [Ready = High, Ready = Low].
Complete the selection process by pressing the will appear in front of the selected option.
ENTER
PRINT key. An asterisk (*)
Setting the Parity
ITEM
12.Press the FEED key. Parity is displayed.
13.Use the 
or CANCEL keys to set the Parity [None, Even, Odd].
Complete the selection process by pressing the will appear in front of the selected option.
ENTER
PRINT key. An asterisk (*)
Setting the Data Bits
ITEM
14.Press the FEED key. Data Bits is displayed.
15.Use the 
or CANCEL keys to set the Data Bits [8 or 7].
Complete the selection process by pressing the will appear in front of the selected option.
ENTER
PRINT key. An asterisk (*)
Setting the Stop Bits
ITEM
16.Press the FEED key. Stop Bits is displayed.
17.Use the 
or CANCEL keys to set the Data Bits [1 or 2].
Complete the selection process by pressing the will appear in front of the selected option.
ENTER
PRINT key. An asterisk (*)
ONLINE
18. Press the PAUSE key. If any parameters were changed, the display will read
ENTER
ENTER to save new defaults. Press the PRINT key to save these values. The display will then read Interface Status Online.
25
