Setting Up WPA-PSK Security

NETGEAR RangeMax Dual Band Wireless-N USB Adapter WNDA3100 User Manual

To configure WPA-PSK security:

1.Run the WNDA3100 Smart Wizard.

a.Make sure that the WNDA3100 software is installed and the wireless USB adapter is fully inserted in a USB port in your computer.

b.Use the icon to open the Smart Wizard. The Settings tab displays:

Figure 2-9

2.Configure the Security settings.

a.In the Profile field, select the profile, or type in a profile name.

b.In the Network Name (SSID) field, and then select the network, or enter the SSID.

Note: You will not get a wireless network connection unless the network SSID matches exactly what is configured in the access point.

c.In the Security section, select WPA2-PSK [AES], and enter the passphrase.

For more about WPA2-PSK, see the link to “Wireless Communications:” in Appendix B.

3.Save your settings in a profile.

a.Click the Save Profile button. All the configuration settings are saved in this profile.

b.Click Apply, and then click Close to exit the Smart Wizard.

2-12

NETGEAR WNDA3100-100NAS user manual Setting Up WPA-PSK Security