RangeMax™ Dual Band Wireless-N Gigabit Router WNDR3700 User Manual

3.For the non-WPS devices that you want to connect, open the networking utility and follow the utility’s instructions to enter the security settings that you selected in Step 2 (the SSID, WPA/ PSK + WPA2/PSK security method, and passphrase).

4.For the WPS devices that you want to connect, follow the procedure “Using a WPS Button to Add a WPS Client” on page 2-14or “Using PIN Entry to Add a WPS Client” on page 2-15.

The settings that you configured in Step 2 are broadcast to the WPS devices so that they can connect to the wireless router.

Note: To make sure that your new wireless settings remain in effect, verify that the Keep Existing Wireless Settings checkbox is selected in the WPS Settings screen.

5.To view a list of all devices connected to your wireless router (including wireless and Ethernet-connected), see “Viewing a List of Attached Devices” on page 4-10.

Safeguarding Your Network

2-19

v1.3, October 2009

Page 41
Image 41
NETGEAR WNDR3700-100NAS user manual V1.3, October