NETGEAR WNDR3700-100NAS user manual To the instructions in Universal Plug and Play on

RangeMax™ Dual Band Wireless-N Gigabit Router WNDR3700 User Manual

When port triggering is enabled, the router monitors outbound traffic looking for a specified outbound “trigger” port. When the router detects outbound traffic on that port, it remembers the IP address of the local computer that sent the data. The router then temporarily opens the specified incoming port or ports, and forwards incoming traffic on the triggered ports to the triggering computer.

While port forwarding creates a static mapping of a port number or range to a single local computer, port triggering can dynamically open ports to any computer that needs them and can close the ports when they are no longer needed.

Note: If you use applications such as multiplayer gaming, peer-to-peer connections, real- time communications such as instant messaging, or remote assistance (a feature in Windows XP), you should also enable Universal Plug and Play (UPnP) according

to the instructions in “Universal Plug and Play” on page 6-13.

To configure port triggering, you need to know which inbound ports the application needs. Also, you need to know the number of the outbound port that will trigger the opening of the inbound ports. You can usually determine this information by contacting the publisher of the application or user groups or newsgroups.

To set up port triggering:

1.Select Port Forwarding/Port Triggering under Advanced in the main menu. The Forwarding/Port Triggering screen displays.

Customizing Your Network Settings 5-19

v1.3, October 2009