NETGEAR WNDR3700-100NAS user manual Viewing a List of Attached Devices, Router Statistics

RangeMax™ Dual Band Wireless-N Gigabit Router WNDR3700 User Manual

The following table describes the router statistics.

Table 4-3. Router Statistics

Item		Description
System Up Time		The time elapsed since the router was last restarted.
Port		The statistics for the WAN (Internet) and LAN (Ethernet) ports. For each port, the
		screen displays:
	Status	The link status of the port.
	TxPkts	The number of packets transmitted on this port since reset or manual clear.
	RxPkts	The number of packets received on this port since reset or manual clear.
	Collisions	The number of collisions on this port since reset or manual clear.
	Tx B/s	The current transmission (outbound) bandwidth used on the WAN and LAN ports.
	Rx B/s	The current reception (inbound) bandwidth used on the WAN and LAN ports.
	Up Time	The time elapsed since this port acquired the link.
Poll Interval		The intervals at which the statistics are updated in this screen.

•To change the polling frequency, enter a time in seconds in the Poll Interval field, and click Set Interval.

•To stop the polling entirely, click Stop.

Viewing a List of Attached Devices

The Attached Devices table lists all IP devices that the router has discovered on the local network. From the main menu, under Maintenance, select Attached Devices to view the table.

Figure 4-7

Using Network Monitoring Tools 4-10

v1.3, October 2009