NETGEAR WNHDE111 5GHz user manual Key Hardware Features, Front Panel, Illuminated Power LED

WNHDE111 5GHz Wireless-N HD Access Point/Bridge User Manual

Key Hardware Features

Before you install and connect your bridge, take a moment to become familiar with its front and back panels—especially the status light and Push N Connect push button on the front panel.

Front Panel

The lights on the front panel indicate the operating status of the bridge.

Illuminated Power LED

On – Amber	The unit is performing the power-on diagnostic tests.
On – Green	The power is on and the router is ready.
Fast blink – Green	A software update is in progress.
Slow blink – Green	There is a problem with the wireless router software.
Off	Power is not being supplied to the unit, the wireless radio is
	turned off, or the LED push button switch on the back is off.
Illuminated WPS Push 'N' Connect Button
On – Amber	The unit is performing the power-on diagnostic tests.
On – Green	The wireless range extender has acquired an Internet
	address.
Blink – Green	Data is being communicated with the Internet.
Off	Power is not being supplied to the unit, or the LED push button
	switch on the back is off.

REVIEWERS: PLEASE VERIFY

Figure 1-1

Note: Pressing the LED On/Off button on the back of the unit turns off all the LEDs, including the these on the front (Power, and WPS), as well as those on the rear (Ethernet status).

Getting Acquainted 1-3

v1.1, May 2008