NETGEAR WNHDE111 5GHz Key Back Panel Label Information, 1TX18149020CB, Product label information

WNHDE111 5GHz Wireless-N HD Access Point/Bridge User Manual

Key Back Panel Label Information

Note: The WNHDE111 comes with a WPA/WPA2 security key enabled by default. This key is the serial number printed on the label on the back of on the unit. The default wireless network name (SSID) is NETGEAR-HD.

This illustration identifies key information printed on the back panel label of the unit.

Default Access	WPS
Address, User Name
and Password	Security Pin

1TX18149020CB

		Serial number	which is also the
				MAC
		default WPA/WPA2 security key		Address
Figure 1-3
Table 1-2. Product label information
Item	Description
Default Access.	Use this URL, user name and password to log in to the unit.
	Note:	During initial setup, the URL will only connect you to the unit
		when your computer is attached directly to one of the unit’s
		Ethernet ports.
	Tip:	Generally, using the NETGEAR setup wizard will be more
		convenient than logging in to the unit with this information.
WPS Security PIN.	This PIN is used for devices that require manual entry of the WPS PIN,
	or with WPS registrar discovery services, found in Windows Vista for
	example.

Getting Acquainted 1-5

v1.1, May 2008