NETGEAR WNHDE111 5GHz user manual Wish

		WNHDE111 5GHz Wireless-N HD Access Point/Bridge User Manual
Table 7-1. Device Info Status Fields (continued)
Field			Description
Wireless LAN
	Wireless Radio		Indicates whether the radio feature of the router is enabled. If not
			enabled, the Wireless LED on the front panel is off.
	WISH		Identifies if WISH is active or not.
	MAC Address		This is the unique physical address being used by the Ethernet ports
			of the wireless interface.
	Network Name (SSID)		The wireless network name (SSID) being used by the wireless port of
			the router. The default is NETGEAR-HD.
	Channel		Identifies the channel of the wireless port being used. Click the link to
			the online document “Wireless Networking Basics” in Appendix B for
			the frequencies used on each channel. In Up to 300 Mbps mode,
			there are two channels: a primary channel (P) and a secondary
			channel (S).
	Security Mode		Indicates the wireless security mode:
			• None
			• WEP
			• WPA/WPA2 (the default)
	Wi-Fi Protected Setup		Indicates whether the radio feature of the router is enabled. If not
			enabled, the Wireless LED on the front panel is off.
LAN Computers			The names and address of devices in the network.

•Click Wireless to display wireless client address, mode, rate and signal strength status.

Figure 7-2

Table 7-3describes the traffic statistics.

Using Network Management Tools 7-3

v1.1, May 2008