Specify Initial Settings
20
N300 WiFi Router
Your Internet service provider (ISP) can provide this information. For more information
about IPv6 Internet connection, see the following sections.
-Use Auto Detect for an IPv6 Internet Connection on page 20
-Use Auto Config for an IPv6 Internet Connection on page 22
-Set Up a 6to4 Tunnel IPv6 Internet Connection on page 23
-Set Up a Fixed IPv6 Internet Connection on page 25
-Set Up a DHCP IPv6 Internet Connection on page 27
-Set Up a PPPoE IPv6 Internet Connection on page 28
6. Click the Apply button.
Your changes are saved.
Requirements for Entering IPv6 Addresses
IPv6 addresses are denoted by eight groups of hexadecimal quartets that are separated by
colons. You can reduce any four-digit group of zeros within an IPv6 address to a single zero
or omit it. The following errors invalidate an IPv6 address:
•More than eight groups of hexadecimal quartets
•More than four hexadecimal characters in a quartet
•More than two colons in a row
Use Auto Detect for an IPv6 Internet Connection
To set up an IPv6 Internet connection through auto detection:
1. Launch a web browser from a computer or wireless device that is connected to the
network.
2. In the address field of the web browser, enter www.routerlogin.net or
www.routerlogin.com.
A login screen displays.
3. Enter the router user name and password.
The user name is admin. The default password is password. The user name and
password are case-sensitive.
The BASIC Home screen displays.
4. Select ADVANCED > Advanced Setup > IPv6.
The IPv6 screen displays.
5. In the Internet Connection Type list, select Auto Detect.