WNR2020 N300 Wireless Router
Installation Guide
Power adapterRouter
Package Contents
Step 1. Prepare the modem.
Unplug the modem’s power. If it has
a battery backup, remove the
battery.
Step 2. Power on the
modem.
Plug in your modem. Put the
battery back in and turn on your
modem.
Wait approximately two minutes
until your modem turns on.
Step 3. Cable the modem.
Cable the modem to the Internet port of
the router with an Ethernet cable.
Step 4. Power on the router.
Connect the power adapter to the
router, then plug it into an outlet.
Wait for the WiFi LED to light.
Step 5. Connect a computer.
You can use an Ethernet cable or
connect with WiFi.
To connect with WiFi, use the WiFi
network name and password on the
router label.
Step 6. Launch a browser.
NETGEAR genie displays.
Follow the genie steps to connect to
the Internet.
If you do not see genie, type
www.routerlogin.net. Then type
admin for the user name and
password for the password.
Modem Router
Internet
DSL or cable
(Not included)
Front and Back Views
Power LED
Internet LED
WiFi LED
Ethernet LAN port LEDs
Ethernet LAN ports
Internet port
Power input
WPS/Reset button
Ethernet cable