NETGEAR manual Rebooting the WPN802 Access Point, Viewing a List of Available Wireless Stations

Reference Manual for the NETGEAR RangeMax™ Wireless Access Point WPN802

Rebooting the WPN802 Access Point

You can reboot the wireless access point from the browser interface or by using the reset button on the rear panel.

1.From the main menu of the browser interface, click the Reboot AP link under the Management heading.

The Reboot AP dialog box appears:

Figure 5-4: Reboot AP dialog box

2. Select Yes, and then click Apply.

Viewing a List of Available Wireless Stations

The Available Wireless Station List contains a table of all IP devices associated with the wireless access point in the wireless network defined by the Wireless Network Name (SSID).

From the main menu of the browser interface, click the Available Wireless Stations List link under the Information Heading. The following screen opens:

Figure 5-5: Available Wireless Station List

For each device, the table shows the Station ID, MAC address, IP Address, and Status (whether the device is allowed to communicate with the wireless access point or not).

Management and Information 5-5

202-10101-01, May 2005