Netopia PN Series manual B8ZS

2-10 Reference Guide

T1 Line Configuration

Line Encoding...	B8ZS
Framing Mode...	ESF
Transmit ANSI PRMs:	No
Number of DS0 Channels:	1
First DS0 Channel:	1
Buildout (-dB)...	Auto
Channel Data Rate...	Nx64k
Clock Source...	Network
Data Link Encapsulation...	Frame Relay

Enter Information supplied to you by your telephone company.

1.Select Line Encoding and press Return. From the pop-up menu, highlight the encoding your telephone service provider uses: B8ZS or AMI. The default setting is B8ZS. Press Return.

2.Select Framing Mode and press Return. From the pop-up menu, highlight either ESF or D4, depending on the framing mode that your telephone service provider advises you to use. The default setting is ESF. Press Return.

3.The ANSI T1.403 standard defines Performance Report Messages (PRMs) that may be transmitted each second from a T1 Integrated CSU to the telephone service provider’s network. By default, the Netopia Router does not send PRMs. However, you can enable these transmissions by toggling Transmit ANSI PRMs to Yes.

4.Select Number of DS0 Channels and enter the number of DS0 channels that you and your telephone service provider have determined are necessary for your T1 line. The default setting for DS0 Channels is 1 (one). Press Return.