Network Technologies 900GV manual Using Menus to Configure the Module

Using Menus to Configure the Module

Using Menus to Configure the Module

The following screen shows the options available from the VNswitch 900GV INSTALLATION MENU when the module is operating in a MultiSwitch 900 configuration. Depending on the configuration state of the module, some options may not appear.

Note that when your module is installed in the MultiSwitch 900, the slot number where the module is installed appears at the top of the menu.

VNswitch 900GV - slot 3

===========================================================

VNswitch 900GV INSTALLATION MENU

[1]Restart with Factory Defaults

[2]Restart with Current Settings

[3]Show Current Settings

[4]Configure IP

[5]Go to Local Console

[6]Product-Specific Options...

[Ctrl/C] Return to Chassis Manager Installation Menu

===========================================================

Enter selection: n <Return>

Configuring the Module in a DIGITAL MultiSwitch 900 4-5