[4] Configure IP
[4] Set In-Band Interface IP Address
This option prompts you to change or enter the module’s
You do not need to configure the module with a subnet mask for SNMP communications with management stations located on the same subnet as the module.
The following example shows the dialog associated with this option:
VNswitch 900GV - slot 3
================================================================
IN-BAND INTERFACE IP ADDRESS CONFIGURATION
Format: The standard 4 octet dotted decimal notation in which
. | each octet of the address is represented as a decimal |
value, separated by a ’.’ character. | |
| example: 16.20.40.156 |
To delete the IP address, enter 0 in the appropriate address field.
Interface | IP Address | Subnet Mask | Other Info |
16.20.216.91 | 255.255.255.0 | ||
OBM Port | 16.20.66.156 | 255.255.255.0 | Speed 9600 bps |
================================================================
Enter the IP address [16.20.126.24] : 16.20.54.156 <Return>
Enter the Subnet Mask [255.0.0.0] : 255.255.0 0 : <Return>
Press Return for IP Configuration Menu.....
NOTE
If Routing is enabled, you will be asked to supply an IFC number prior to entering an IP address.