NTI UNIMUX SERIES USB KVM SWITCH
Select Country Code
It is possible to configure the UNIMUX to emulate a specific international Sun keyboard regardless of what actual keyboard is connected. This is recommended when the CPU needs the layout code (i.e. a SUN CPU) and the keyboard doesn't have an explicit layout code (i.e. some Windows keyboards). To do this, manually set the UNIMUX to indicate the international keyboard identification number to the CPU using the following procedure;
1.Connect the keyboard to be used to the UNIMUX
2.Enter Command Mode
3.Type Lxx, where xx is the number from the list below that corresponds to the desired country code
4.Exit Command Mode
Note: If any SUN CPUs are connected to the UNIMUX, they must be rebooted. Keyboard configuration is only read by SUN CPUs on startup.
Country Codes
00 | Auto Detect | 13 | International (ISO) | 26 | Swedish |
01 | Arabic | 14 | Italian | 27 | Swiss/French |
02 | Belgian | 15 | Japan (Katakana) | 28 | Swiss/German |
03 | Canadian- | 16 | Korean | 29 | Switzerland |
| Bilingual |
|
|
|
|
04 | 17 | Latin American | 30 | Taiwan | |
05 | Czech Republic | 18 | Netherlands/Dutch | 31 | Turkish |
06 | Danish | 19 | Norwegian | 32 | UK |
07 | Finnish | 20 | Persian (Farsi) | 33 | US |
08 | French | 21 | Poland | 34 | Yugoslavia |
09 | German | 22 | Portuguese |
|
|
10 | Greek | 23 | Russia |
|
|
11 | Hebrew | 24 | Slovakia |
|
|
12 | Hungary | 25 | Spanish |
|
|
Figure 9- Country Codes for international SUN keyboards
For more on international SUN keyboards, see page 18.
Mice and Trackballs with MACs
The UNIMUX can be configured to enable full functionality between mice and trackballs having two or more buttons and USB MAC CPUs. By default, the ports on the UNIMUX are configured for use with WINDOWS and SUN CPUs and have no special translation for using
NOTE: Be sure to
11
