![](/images/new-backgrounds/1165222/16522223x1.webp)
NTI UNIMUX
2.Connect the user devices to the USB type A female ports labeled with the USB symbol ( ) on the rear of the UNIMUX switch (see Figure 5 ).
Note: If there are three (3) USB type A female ports present (models with CAC card reader or touch screen support only), then the third USB port is available for connection of a USB cable from a touch screen type monitor or CAC card reader. The USB ports are not device specific, so the mouse, keyboard, and touchscreen monitor or CAC card reader cable can be connected to any of the available USB ports present.
Note: If device cables are not long enough to reach the UNIMUX switch, they can be extended either 5 or 10 meters using either 1 or 2 NTI
Note: Only one
Rear View of UNIMUX-USBV-16HDU
16 | 8 CPU 15 | 7 | 14 | 6 CPU 13 | 5 | 12 | 4 CPU 11 | 3 | 10 | 2 CPU | 9 | 1 | MONITOR | RS232 |
| ||||||||||||||
250V,2A NETWORK TECHNOLOGIES INCORPORATED | 1275 Danner Drive, Aurora Ohio 44202 | www.networktechinc.com |
|
|
|
|
|
|
|
USB Type A Female USB Type A Male
USB Type A
Male Connectors
USB Keyboard | USB | CAC |
Mouse | Reader |
Figure 5- Install user devices (mouse and keyboard)
TO UNIMUX
SWITCH
USB TYPE A
MALE CONNECTOR
CPU
NTIR NETWORK
TECHNOLOGIES
INCORPORATED
1275 Danner Drive
Aurora,Ohio 44202
Tel:
Fax:
www.nti1.com
DEVICE
USB
USB TYPE A | USB KEYBOARD |
FEMALE CONNECTOR
Figure 6- Use USB-A+A-5M to extend a device, or a computer
7