Using the TV’s Single VHF/UHF F-Connector | Optimus 109 manual

16-546.fm Page 10 Tuesday, July 20, 1999 4:25 PM

Using the TV’s

Single VHF/UHF F-Connector

Use the supplied 75-ohm cable to connect the VCR’s VHF/UHF CATV OUT F-connector to your TV’s VHF/UHF antenna input F-connector.

Using the TV’s

Single VHF F-Connector and

Double UHF Screw Terminals

If your TV has a single VHF F-connector and double UHF screw terminals and your antenna is not VHF-only (channels 2–13) or UHF-only (channels 14–69), you need a band splitter (such as Cat. No. 15-1231, not supplied) to connect your VCR to the TV.

75-Ohm Cable

VHF/UHF

75-Ohm Cable
UHF	VHF
300-Ohm
UHF Output
Band Splitter
	75-Ohm
	VHF Output

1.Connect the band splitter’s 75-ohm input cable to the VCR’s VHF/UHF CATV OUT ter- minal.

2.Connect the splitter’s single VHF 75-ohm output F-connector to your TV’s VHF input F-connector.

3.Connect the splitter’s UHF 300-ohm gold wires to your TV’s double UHF input screw terminals.

10

Image 10

Optimus 109 owner manual Using the TV’s Single VHF/UHF F-Connector

Contents

Model Important Safety Instructions Do not Open RECORDING/PLAYBACK FeaturesTuning Tape Motion Controls Other Features Automatic DST Daylight Saving Time Ad Contents Manual Tracking Using this Manual Supplied AccessoriesBefore YOU Begin Using the TV’s Audio/Video Input Jacks Connecting the VCR for Playback onlyConnections Using the TV’s Single VHF/UHF F-Connector Connecting an Antenna Connecting the VCR for Playback and RecordingUsing the TV’s Audio/Video Input Jacks Using the TV’s Single VHF/UHF F-Connector Connecting Cable If you use a cable box Important Reminder to the Catv System Hm Cable Connecting Power Setting the Output Channel SwitchConnecting an A/B Switch A Signal Splitter Preparation Using the Remote ControlInstalling the Batteries Quick Look at the Controls Turns the VCR’s power on/off If a tape is playing Tunes the VCR to the next lower channel REW quickly rewinds a video cassette tape if Setting the ON-SCREEN Programming Language Four Head Setting the Clock Setting the Channels the VCR Tunes to Catv Adding/Erasing Channels Press or to highlight Auto or MAN- UAL, then press SET Basic Operation Using the TV’s TunerUsing the VCR’s Tuner Watching TV Loading a Video Tape Watching a Video TapePlaying a Video Tape Blue Screen Special FunctionsDisplays Operation Displays Fast-Forward/Rewind Tape Motion IndicatorsMotion Controls Freeze-Frame Visual Search Variable-Speed Slow Motion Using the Zero Back Function Using the REAL-TIME CounterAutomatic Repeat Playback Auto Tracking Index SearchManual Tracking Mode Lock Auto Enhanced Picture Recording Speeds RecordingTape Selection Selecting the Signal to Record Record Protection Recording a Program As You Watch It Quick Timer RecordingImmediate Recording Recording One Program While You Watch Another Automatic Timer Recording QTR Notes Setting the Program Timer SUN Fm Page 38 Tuesday, July 20, 1999 425 PM Clearing a Program Timer Monitoring an Automatic Timer RecordingChecking/Changing Program Timers Automatic Timer Recording Hints Dubbing Copying a Tape Troubleshooting Additional Information VCR Care and Maintenance Servicing Your VCR Cleaning the Video HeadsStoring Your Video Cassettes Specifications 120 V, 60 Hz Fm Page 47 Tuesday, July 20, 1999 425 PM Division of Tandy Corporation RadioShackFort Worth, Texas