Automatic Repeat Playback
You can set the VCR to automatically repeat a recorded portion of a tape when the VCR finds a blank portion of more than 15 seconds.
Follow these steps to turn automatic repeat playback on or off.
1.Press MENU to display the main menu.
2.Press 
to highlight SET UP, then press SET. AUTO REPEAT appears on the TV screen.
USING THE REAL-TIME
COUNTER
Your VCR’s
To display the
| AUTO | REPEAT | ON | OFF |
| BLUE | SCREEN | ON | OFF |
CHANNEL PRESET
SELECT :
CHANGE:
ENTER :SET EXIT :MENU
3.Press 
or 
to highlight ON or OFF as desired.
Note: If you turn on automatic repeat play- back:
•Any tape will play until the VCR finds a
•If you press 
REW and the tape reaches the beginning, playback auto- matically starts.
4.Press SET. The display returns to the nor- mal screen.
30
To reset the counter to 0:00:00, press CAN- CEL.
Notes:
•If you rewind the tape past 0:00.00, the display shows the count with a minus
•The counter does not work with blank tapes or blank portions of partially recorded tapes.
•The counter also resets when you remove a tape.
Using the Zero Back Function
At any time during playback, you can reset the
1.During playback, press DISPLAY on the remote control to display the
2.When you see the location on the tape that you want to return to later, press CANCEL on the remote control. The
3.To return to the 0:00.00 location at a later time during playback, press ZERO BACK. The tape automatically rewinds or
