New Balance 8.0e Computer Assembly, Step Water Bottle Holder Assembly, Step AC Adapter

STEP 6 – Computer Assembly

a)Remove the Phillips Screws from the back of the Computer.

b)Snap together Connectors for Computer, tucking the Wires inside the Stationary Bar Assembly.

The Book Holder can be attached to the Computer at any time.

c)Attach the Computer using the four Phillips Screws you removed in Step 6a into the back of the Computer. Tighten with the Screwdriver provided.

d)Remove Battery Door on the back of the Computer.

Insert four “C” Batteries (included) in numbered order and replace Battery Door.

Front View

book holder

computer

6a

stationary bar

assembly connectors

STEP 7 –

Water Bottle Holder Assembly

Remove the two M4 x 12mm Machine Screws from Vertical Column Tube. Line up Water Bottle Holder and attach to the Vertical Column Tube by re-inserting Screws and tightening them with the Screwdriver provided.

vertical column tube

7

remove

screw

water bottle holder

remove

screw

8

	Back View
four "C" batteries		6c	door
			battery
4	3
1	2

6b	back of
	computer
stationary bar
assembly

Step 8 –

AC Adapter 8

Insert AC Adapter into rear of unit, then plug into wall.

AC

adapter

Assembly is now complete.

IMPORTANT:

Please read pages 9-10 before beginning your workout for important instructions on how to use your New Balance

8.0e Elliptical Trainer.