•If the pilot will not stay lit after several tries, turn the gas control knob to “OFF” and call your service technician or gas supplier.
IGNITOR ELECTRODE
PILOT BURNER
12.Turn control knob counterclockwise
to the “ON” position. Push the “ON/OFF” toggle switch to the “ON” position. The main burner should light.
13.Close access panel door.
14.Turn on all electrical power to the appliance.
NOTE: This unit may be used with an optional Wall Thermostat. If so, the Wall Thermostat needs to be set at a higher temperature than the room temperature.
TO TURN OFF GAS TO
APPLIANCE
SHUTTING OFF UNIT
1.Open access panel door located at bottom front of the appliance.
2.“If equip with thermostat set to lowest setting.”
3.Turn control knob clockwise 
to the “OFF” position.
4.Turn off all electric power to the appliance if service is to be performed.
5.Close access panel door.
SHUTTING OFF BURNER ONLY (Pilot stays lit.)
Turn control knob clockwise | to the “PILOT” position. | |
|
|
|
Page 21
