New Buck Corporation 32 manual Installation In Residential, Or After-Marketmobile Homes

EXPLODED VIEW OF MODEL 32 (WS)

WOODEN SURROUND BASE (HEARTH) (SHOWN AS VIEWED FROM REAR OF SURROUND)

INSTALLATION IN RESIDENTIAL

OR AFTER-MARKET MOBILE HOMES

CHECK GAS TYPE:

THIS APPLIANCE IS ONLY FOR USE WITH THE TYPE OF GAS INDICATED ON THE RATING PLATE. THIS APPLIANCE IS NOT CONVERTIBLE FOR USE WITH OTHER GASES.

INSTALLATION SUPPLIES:

Before installing the heater, gather the following materials:

-	external regulator	-	ground joint union
	(supplied by installer for propane)	-	sediment trap
- piping (check local codes)		-	tee joint
-	manual shutoff valve*	-	pipe wrench
-	test gauge connection*	- sealant (resistant to LP gas)

*An C.S.A. design-certified manual shutoff valve with 1/8" NPT tap is an acceptable alternative to test gauge connection. Purchase the optional C.S.A. design-certified manual shutoff valve from your dealer.

NOTE: See “Producing Adequate Ventilation” page 12.

.THIS APPLIANCE MAY BE INSTALLED IN AN AFTERMARKET*, PERMANENTLY

LOCATED, MANUFACTURED (MOBILE) HOME, WHERE NOT PROHIBITED BY LOCAL CODES.

*After Market: Completion of sale, not for the purpose of resale from the manufacturer.

Page 11