NewAir 8625 user manual Vacation Hold, Check Filter Reset

110-1101 7/22/04 8:16 AM Page 10

Another way to select a temporary hold is:

1.Press SELECT until the cursor is over TEMP HOLD. Press SET.

The temperature will be blinking. Use the or button to change the temperature.

2.Press SET.

To cancel a temporary hold, press SELECT until the cursor is above RUN/SET PROG. Press SET.

Vacation Hold

You can set your thermostat to hold a desired temperature for 1-365 days. Vacation hold terminates at midnight of the last day. The thermostat returns to normal operation the next day at 12:01 AM.

1.Press SELECT until the cursor is over VAC HOLD. Press SET. The temperature will be blinking. Use the or button to change the temperature.

2.Press SET. 7d will be displayed. Use the or button to adjust between 1 and 365 days.

3.Press SET.

To cancel a vacation hold, press SELECT until the cursor is above RUN/SET PROG. Press SET.

Check Filter Reset

Once the filter timer has expired, CHECK FILTER will turn on and stay on. To clear the message and reset the timer:

1. Press SELECT and SET and hold for

3 seconds. CLr will appear in the time display.

2. Press any key to clear the message. The display will transition to the tem- perature scale display. See step 4 in

CUSTOMIZING YOUR THERMOSTAT.

3.No further input is needed. Within a few seconds, the display will return to the normal operating mode.

Reset

The RESET button is located above the upper left corner of the display. Only use the reset feature if the thermostat is malfunctioning.

RESET

BUTTON

MON

°F

C

Y2

R

W2/E

L

G O B Y1 W1

10